Home › Products › Vacuum valves › Vacuum Gate Valves › 3-Position Throttle Gate Valve

Vacuum Gate Valves

Category
Specification

※ Please select product classify ※

3-Position Throttle Gate Valve

UHV-gate valves(unlubricated mechanism)

HV-gate valve (Aluminum body)

HV-gate valves(lubricated mechanism)

Customized Gate valves

3-Position Throttle Gate Valve

HV type 3 position throttle ISO flange gate valve

UHV type 3 position throttle gate valve

Specification:

Use lockable cylinder, gate plate could precisely stop at alternative position.
Alternative position is set by reed sensor.
Good reproducibility of gate plate position, tolerance ±1%.
Procedure control is programmable and flexible.

Material	Body			SUS304
	Carriage			Linkage type	SUS304
				Ball type Size under 10”
				Ball type Size above 10”(included)	SUS304、A6061-T6
	Gate			Linkage type	SUS304
				Ball type Size under 10”
				Ball type Size above 10”(included)	A6061-T6
	Bellows			AM350
Life Cycle	HV :DN100 ~ 200_300,000 cycles DN250 ~ 200,000 cycles UHV :DN100 _ 100,000 cycles DN150 ~ 250_50,000 cycles
Helium leak rates at 1 atm differential	＜2×10^-9 mbar․l /sec for O-ring ＜5×10^-10 mbar․l /sec for gasket seal
Bake Temperature	Open		200℃ Viton bonnet seal
	Closed		150℃ Viton bonnet seal
Pressure Range (mbar)	HV: 1x10^-8 ～ 1000 UHV: 1x10^-10 ～1000
Maximum ΔP (mbar)	≦ 30 before opening
Standard Seal	Gate	Viton O-ring
	Bonnet	Viton O-ring or OFHC copper gasket
Actuator	Pneumatic
Compressed air supply Tube connection Pressure range	Ø6 mm 4~6 Kg/cm²(overpressure)
Surface Treatment	Scotch Polished
Options	a. Position indicator b. Pneumatic control solenoid valve c. Roughing port d. Other material Gate O-ring seal

Warranty conditions :

1. The period of warranty shall start from the date of delivery of the product to the customer and shall cover a period of 1 year, or the specific life cycles, whichever comes first.

2. Operation only in air, inert gas and vacuum.

3. Warranty will not apply to the damages caused by nature disasters, faulty usages or consumable purposes.

Larger or special size available upon request, contact us with your specific requirements. Please offer your drawings to contact us, we will contact with you soon.

Vacuum gate valves manufacturers

Htc vacuum (HIGHLIGHT TECH CORP.)gate valves are appropriate for both HV and UHV applications and can be operated in pneumatic or in manual modes. Htc gate valves can be used with Cryo-Pumps, Turbomolecular Pumps or in any applications requiring clean, high life cycle, and low maintenance processing. Htc gate valves are available in all flange configurations, KF, ISO, ANSI, JIS, and CF.

Vacuum gate valve advanced service and support

Htc vacuum gate valve are available with various options to allow you to select exactly the features you need for your applications. You can add the roughing and gauge ports on the basic valve style.

Please refer to the left photo :
we added an elbow with a CF flange on the valve body to meet the special requirement of the customer. If you have any unique inquiry please contact us, we can discuss about the details of port type, size and location.

There are some critical applications of valves in Lab and research center which need RGA (Residual Gas Analyzer) data of valves to confirm the outgassing source of the system. Htc has the integrated RGA system with Inficon MPH100M analyzer with industry-leading data collection speed, minimum detectable partial pressure and signal-to-noise ratio. Htc is able to provide customers the RGA report for the price of the fixture and norminal labor charge.

gate valve advanced service and support

gate valve advanced service and support .

Warranty conditions :

1. The period of warranty shall start from the date of delivery of the product to the customer and shall cover a period of 1 year, or the specific life cycles, whichever comes first.

2. Operation only in air, inert gas and vacuum.

3. Warranty will not apply to the damages caused by nature disasters, faulty usages or consumable purposes.

Larger or special size available upon request, contact us with your specific requirements. Please offer your drawings to contact us, we will contact with you soon.