Home › Products › Vacuum valves › Teflon Coating Vacuum Valve › PTFE(Teflon) Coating Vacuum Valve

Teflon Coating Vacuum Valve

Category
Specification

PTFE(Teflon) Coating Vacuum Valve

PTFE Teflon Coating Valve for process gases | Vacuum Valve : Htc vacuum

Manual Teflon Coating Vacuum Angle Valve

Pneumatic Teflon Coating Vacuum Angle valve

Pneumatic Y-inline Teflon Coating Vacuum Valve

Teflon vacuum valve Technical data：

Flanges	KF(NW)
Installation angle	Any position
Pressure range	1atm ~ 1x10^-7 Torr
Leak rate	1x10^-7 mbar.l/s
Material of valve body	SS304
Material of coating	Teflon (Perma Shield Coating)
Poppet seal	Viton(other material available upon request)
Operating air pressure	4 ~ 6.5 kg/cm²
Solenoid	Option
Position sensor	Option

PTFE vacuum valve Features：

Teflon lining and Teflon parts inside valve for process gases.
Very smooth surface of the coating layer.
Continuous use to 120°C in most applications.(The maximum working temperate of the valve INSDIE AND OUTSID is 120 degree)
The coating layer is mechanically tough with excellent adhesion and abrasion resistance.
The coating layer is inert and will not absorb water or chemicals.
Fully opening for improved conductance.
Position sensors can be installed on the cylinder for valve open/close indication.
FFKM O-ring available upon request.
Manual operating or fail safe operating (closes in the event of air pressure loss) available upon request.

Coating vacuum valve Applications：

Htc vacuum teflon coating valve

Warranty conditions :

1. The period of warranty shall start from the date of delivery of the product to the customer and shall cover a period of 1 year, or the specific life cycles, whichever comes first.

2. Operation only in air, inert gas and vacuum.

3. Warranty will not apply to the damages caused by nature disasters, faulty usages or consumable purposes.

Welcome to contact us , Htc Vacuum is willing to provide solutions for you.

Teflon lining vacuum valve(TLVV Teflon Lining Vacuum Valve) is a fully engineered device of stainless steel vacuum component with its durable and highly chemical resistant coating. The Teflon (PermaShield Coating) lining is available in a wide range of Htc’s standard vacuum valves from 1”(25)valve port diameter to 6”(150)port diameter.

With more options to get the job done than any other vacuum parts manufacturer and the ability to produce customized design valves. TLVV can meet most of your corrosive fume exhaust duct and vent pipe requirements.

TLVV can be applied in the following industries：mining, petrochemical, plastic industries, gas refining, power plant, gas manufacture, electronic industries, pharmaceutical, semiconductor industries, optoelectronic industries, solar cell industries etc.

TLVV are usually installed between the vacuum pump and scrubber of exhaust piping line, customers must clarify the process gases and check the chemical resistance legend before installation.

Higher volume or custom cold traps available upon request, please send your inquiry to ec@high-light.com.tw thank you.